Nut

Products Categories

Refined carbon steel stainless steel U-bolts

Refined hot-dip galvanized bolts

High strength precision machined T-bolts with superior performance

DIN933 304 A2-70 hexagonal bolt

DIN931 304 A2-70 hexagonal bolt

DIN 6921 Refined Flange Bolts for Enhanced Performance and Durability

DIN 913 914 915 916 Precision High Strength Tightening Bolt

DIN 912 refined hexagonal bolt cup head half round head flat head

DIN 603 refined carriage bolts

Refined round nut: Enhancing fastening solutions with precision and durability

0102030405

Refined hot-dip galvanized nuts

Grade: 4.8, 8.8, 10.9, 12.9, Material: Q235, 35K, 45K, 40Cr, 35Crmo, 42Crmo, Surface Treatment: Blackened, Electrogalvanized, Dacromet, Hot-dip Galvanized, Galvanized, etc!

Hot dip galvanized nut is a type of nut that has undergone hot-dip galvanizing treatment. Hot dip galvanizing, also known as hot-dip galvanizing, is the process of soaking nuts in molten zinc solution to form a zinc coating on their surface.

product details

Hot dip galvanized nuts have the following advantagesadvantages

1. Good durability: In suburban environments, the standard hot-dip galvanized anti rust thickness can be maintained for more than 50 years without the need for repair; In urban or coastal areas, the standard hot-dip galvanized rust prevention layer can be maintained for 20 years without the need for repair.

2. Low processing cost: The cost of hot-dip galvanizing for rust prevention is lower than that of other paint coatings.

3. Good reliability: The galvanized layer is metallurgical bonded with the steel and becomes a part of the steel surface, so the stability of the coating is relatively reliable.:

4. Time and effort saving: The galvanizing process is faster than other coating construction methods and can avoid the time required for painting on the construction site after installation.

5. Strong coating toughness: able to withstand mechanical damage during transportation and use.

6. Integrated protection: Every part of the plated part can be coated with zinc, providing comprehensive protection even in recesses, sharp corners, and hidden areas.

Its performance level is usually between 4.8 and 10.9, with a variety of specifications, such as M12-M48. The thickness of hot-dip galvanized coating is generally ≥ 54 μ m. The quality and standards are usually produced according to the requirements of GB5780-2000 and GB41-2000, and the mechanical properties comply with GB3980.1-2000 and GB3980.2-2000.

The service life of hot-dip galvanized nuts is affected by various factors, such as the corrosiveness of the usage environment, the load they bear, and maintenance conditions.

In general outdoor environments, if maintained properly, the service life of hot-dip galvanized nuts can usually reach 15-30 years. But in highly corrosive marine environments or areas with severe industrial pollution, its service life may be correspondingly shortened.

If there is a large load, frequent vibration or lack of regular maintenance and inspection during use, it will also have adverse effects on its service life.

It should be noted that this is only a rough estimate, and the actual service life may vary greatly depending on specific circumstances.

Hot dip galvanized nuts have good corrosion resistance.

The hot-dip galvanizing process forms a dense zinc coating on the surface of the nut. Zinc can form a protective oxide film in the atmospheric environment, thereby preventing direct contact between oxygen and moisture and the nut body, and delaying the occurrence of corrosion.

Compared to untreated nuts, hot-dip galvanized nuts can significantly improve their resistance to atmospheric corrosion, water corrosion, and general chemical corrosion. In a normal atmospheric environment, its corrosion resistance is excellent.

However, the corrosion resistance of hot-dip galvanized nuts is not absolutely unlimited. In harsh corrosive environments such as high humidity, strong acidity and alkalinity, and high salt spray, the zinc coating may gradually corrode over time, but it still has a longer corrosion resistance time than un galvanized nuts.

Overall, hot-dip galvanized nuts can provide reliable corrosion protection in most common usage environments and are an economical and effective anti-corrosion treatment method.

Handan Rihang Fastener Sales Co., Ltd. (referred to as "Rihang") is committed to the production and sales of high-quality fastener products. With excellent products and a complete customer service system, the company's customer base covers industries such as communication, electronics, chemical, metallurgy, molds, hydraulic machinery, automobiles, electricity, solar energy, wind energy, high-speed rail, curtain wall, construction, shipbuilding, and mechanical equipment. The company mainly produces and sells various high-quality bolts, nuts, screws, and non-standard special fasteners according to national standards (GB), German standards (DIN), Italian standards (UNI), American standards (ANSI), and ISO standards. All products sold by the company have passed ISO9001, QS9000 and other assurance systems, as well as A2LA laboratory certification in compliance with the US FQA Act. The management team of JAL has an unwavering spirit of perseverance, implementing refined management for customers. From placing orders, verifying orders, responding for the first time, order allocation, delivery plans, to ensuring the safety stock of customer procurement needs, Zhongmai people start from every detail, striving for accuracy, precision, and speed, and developing personalized service plans for each customer to achieve one-stop procurement management for customers. "High quality products, fine management, and fast service" - Zhongmai People's service commitment!